LiftMaster, Chamberlain and Genie opener repair in Somers

LiftMaster, Chamberlain and Genie openers fail in different ways. Here is what to look for on each.

Call (914) 743-3206

In short

Most openers in Somers garages are LiftMaster, Chamberlain or Genie. Each has typical faults: worn drive gears, failed logic boards, dead remotes. A local technician matches parts to the model and gives the price before starting.

Belt-drive garage door opener on the ceiling rail

Openers we see in Somers

In Heritage Hills, the condominium garages were built in phases with the same openers in each phase, so failures come in clusters; residents there often want a simple, reliable unit with a large-button remote and a keypad. Around Lake Lincolndale, Shenorock and Lake Purdys, former summer cottages have short, low, damp garages, where rail length has to be measured and boards corrode. In Granite Springs, Amawalk and Baldwin Place, colonials from the 1970s to the 1990s on wooded lots have builder chain drives now due for gears. Somers loses power in storms, and battery backup is a regular request. Lightning over the reservoirs takes out logic boards each summer, and a surge protector on the opener's outlet is a small, sensible addition.

Which opener do you have?

The brand is printed on the motor unit on the ceiling and usually on the remote. Three names cover most garages:

  • LiftMaster is sold through dealers and installers. If the opener came with the house or was fitted by a door company, it is often a LiftMaster.
  • Chamberlain is the same manufacturer's retail line, sold in home-improvement stores. Many older Craftsman openers were built by the same company and take the same parts.
  • Genie is a separate manufacturer with its own remotes, sensors and parts.

Before you call, note the brand and the model number on the label of the motor unit. It saves a step.

Common faults on these openers

Different makes fail in different, fairly predictable ways:

  • Motor hums, door stays put. On Chamberlain-built chain drives this is usually a stripped drive gear. On a Genie it is often the capacitor.
  • Remote and keypad dead, wall button works. The receiver or logic board has failed, or the remotes need reprogramming with the Learn button.
  • App shows the door offline. The Wi-Fi module in newer LiftMaster and Chamberlain units, or the add-on unit on a Genie, has lost its connection.
  • Door stops partway or reverses. Travel and force settings have drifted, or the door itself is out of balance and the opener is protecting itself.
  • Grinding or rattling. A loose chain, a worn belt, or a dry screw on older Genie models.

Fixing it, or fitting a new one

Most opener faults are repairable: gears, capacitors, boards, sensors, remotes, chains and belts. The technician brings the common parts for LiftMaster, Chamberlain and Genie units and matches anything else by model number.

An opener that is twenty years old, has already had major repairs, or lacks current safety features may not be worth another part. In that case you are shown what a replacement would involve, including quieter belt-drive units, wall-mount units for low ceilings and models with battery backup, and you decide. The price is given before work starts.

Brand names are used here only to describe the equipment being repaired. HIC and the technicians in its partner network are independent and are not affiliated with, authorized by or endorsed by Chamberlain Group, LiftMaster, Craftsman or Genie.

Around Somers

  • Shenorock: Lake community north of the Amawalk Reservoir, with small and added-on garages.
  • Granite Springs and Amawalk: Country lanes near the reservoir with colonials and two-car garages.

See the full Somers service area.

Door stuck? Call before you try to force it.

Keep people and pets away from a door that's stuck or crooked, unplug the opener, and give us a call.

Call (914) 743-3206
Call (914) 743-3206