Noisy garage door and tune-ups in Somers

Noise is the earliest warning a garage door gives. It is usually a simple fix if it is dealt with in time.

Call (914) 743-3206

In short

For a noisy or jerky garage door in Somers: lubricate hinges and rollers, keep the tracks clean, and have the balance and springs checked once a year. Worn rollers are the usual cause of noise and are quick to replace.

Single garage door with torsion spring and opener, seen from inside

Wear and weather in Somers

In Heritage Hills, doors were installed in phases and wear out in phases; many residents prefer a scheduled yearly service to an emergency. A door that lifts easily by hand matters there, for the day the power is out. Around Lake Lincolndale, Shenorock and Lake Purdys, small damp garages rust hardware quickly. In Granite Springs, Amawalk and Baldwin Place, wooded lots bring leaves, grit and mice. Reservoir mist rusts unpainted spring coils. Northern Westchester winters are cold enough to stiffen lubricant and weaken springs, and I-684 and Route 100 bring salt. Seasonal residents who leave for the winter should have the door checked before they go and when they return.

What the noise is telling you

  • Squeaking or squealing: dry hinges, rollers or springs. Usually a lubrication job.
  • Grinding or rumbling: worn rollers, or steel rollers with failed bearings.
  • Popping as the door moves: spring coils binding, or a section joint that needs attention.
  • Rattling or vibrating: loose hinge bolts, track brackets or a slack opener chain.
  • A bang: not a noise to tune away. Stop using the door; a spring or cable may have failed.

Simple upkeep between visits

Three things are safe for any homeowner: lubricating the hinges and rollers with a product made for garage doors, wiping the tracks and the sensor lenses clean, and testing that the door reverses when it meets an obstacle or when the sensor beam is broken.

Three things are not: adjusting springs, loosening the bottom brackets where the cables attach, and removing a section's hinges while the door is under tension. Those are where injuries happen.

What happens during maintenance

Balance test, spring adjustment, hardware tightened, rollers and hinges checked for wear, cables checked for fraying, tracks cleaned and aligned, everything that should be lubricated is, and the opener's safety features are tested. Swapping noisy steel rollers for nylon ones is the single change that quiets most doors. Nothing is replaced without your say, and the price comes first.

Around Somers

  • Lake Purdys and Baldwin Place: The northeast lake area near I-684 and the western edge by Mahopac.
  • Heritage Hills: About 2,600 condo homes from the 1970s onward, many with attached single garages.

See the full Somers service area.

Door stuck? Call before you try to force it.

Keep people and pets away from a door that's stuck or crooked, unplug the opener, and give us a call.

Call (914) 743-3206
Call (914) 743-3206